5
4
Portable Load Unit introduction
Portable Load Unit
2
3
Product specification
2.1
2.3
3.1
2.2
Dimensions PLU
205 × 155 × 250 mm
Dimensions RCD
45 × 26 × 10mm (Cable 50mm)
Mass PLU
5000g
Mass RCD
30g
Input Voltage
24V
Operating Temperature
+5 to +35°C
Max Altitude
3000m
Certification
CE and FCC
Input Electrical Connector
XT60 Male
Maximum Power Draw
900W
Status LED
Stop button
Reconditioning Dongle
Power connection point
Reconditioning Dongle
Portable Load Unit description
The Portable Load Unit (PLU) should be used with an Intelligent Energy Fuel
Cell Power Module (FCPM) and the Reconditioning Dongle (RCD). The PLU
enables the fuel cell stack to be kept at optimal performance, especially after
periods of non-operation.
To allow the FCPM to be reconditioned to an optimal state, the function of
both the PLU and RCD should be understood. The RCD issues commands to the
FCPM which accelerates the reconditioning process. The PLU allows the FCPM
to deliver maximum power in a controlled manner.
Compatible Intelligent Energy products for the Portable Load Unit
The Portable Load Unit can be used with the following fuel cell products from
Intelligent Energy:
· 650W FCPM
· 800W FCPM
Reconditioning Dongle
Air inlet
Air exhaust
FCPM connection
