4
1 Safety warnings
• Only qualified technicians trained in high pressure flammable gases must carry out
fitting of regulators and filling of cylinders and do so in accordance with local laws
and Health and Safety (H&S) regulations.
• The customer is responsible for ensuring all technicians and pilots are suitably
trained, accredited and operate in compliance with local laws and H&S regulations.
• The customer is responsible for ensuring the safe operation of the FCPM in line with
the User Manual at all times.
• This device requires oxygen to operate.
• A minimum of 1m
3
/min of oxygen is required for operation.
• Up to of 20m
3
/min air is required for cooling.
• FCPM not to be used in dusty, smoky or corrosive gas environments.
• Do not use FCPM in rain or snow.
• During integration there is a risk of exposed electrical conductors.
• Pressurised hydrogen present. Highly flammable!
• Do not operate the FCPM if the casing is damaged or missing.
• FCPM should be inspected for damage and checked for leaks prior to use.
• Do not transport the FCPM with the hydrogen supply connected.
• Do not remove casing from Module
• Do not use this FCPM if any part has been immersed or flooded with water.
Immediately call the manufacturer or manufacturer’s representative to inspect
the FCPM and to replace any functional part that has been affected.
