background image

11

EU Declaration of Conformity 

In accordance with EN ISO 17050-1:2010

8

Intelligent Energy Limited 

of

Charnwood Building, Holywell Park, Ashby Road, Loughborough, Leicestershire, 
United Kingdom, LE11 3GB

In accordance with the following Directive(s):

 · 2014/30/EC 

The Electromagnetic Compatibility Directive

 · 2014/95/EU 

General Product Safety Directive

Hereby declares that:

 · 650W/800W Fuel Cell Power Lightweight Pressure Regulator

Part number: 10005518

Is in conformity with the applicable requirements of the Directives set out above and the  
following standards documents:

 · EN 61000-6-2:2005 

Electromagnetic compatibility (EMC) –  

 

Generic standards – Immunity for  

 

industrial environments 

 · EN 61000-6-4:2007+A1:2011 

Electromagnetic compatibility (EMC) –  

 

Generic standards – Emission standard  

 

for industrial environments

A copy of the official version of this certificate duly signed by an authorised  
signatory of the manufacturer is available upon request by emailing  
[email protected]

Intelligent Energy Limited, Charnwood Building, Holywell Park, Ashby Road, 
Loughborough, Leicestershire, United Kingdom, LE11 3GB

25

th

 June 2018 

Document Ref. No. 263-DOC-001

Содержание 10005518













Отзывы: