DocRef#0510601
IR-904 Extended Life - User Guide
Page 8
Chapter 3 - Range Test Mode
3
Range Test Mode
The IR-904 has a 3 minute Range Test Mode
to assist in the setup of the receiver.
Range Test Mode:
After both programming menus, the IR-904 will automatically enter the Range Test
Mode. During Range Test Mode, the IR-904 will transmit a Range Test signal every
3 seconds. This Range Test will cause the receiver to briefly illuminate its LED to
indicate that it is still in the range of the IR-904. This is very useful when choosing
where to install the receiver. The Range Test Mode will last for 3 minutes. The
user can exit Range Test Mode anytime by pressing the
PROGRAMMING BUTTON
.
Range Test Mode with WTM-3:
The WTM-3 has a unique feature when range testing with an IR-904. When the
signal is the strongest, the WTM-3 will flash the Range Test LED three times. As
the signal gets weaker, the Range Test LED will flash two times, then one time,
then not flash at all when the IR-904 is out of range. This unique feature in the
WTM-3 can help the user identify where the signal is the strongest.
