DocRef#0510601
IR-904 Extended Life - User Guide
Page 6
Chapter 2 - Programming
2
Programming
The IR-904 will enter two programming menus
shortly after installing the batteries.
Programming Menus:
When the IR-904 enters the programming menu, the
RED LED
will illuminate for 5
seconds. The user may press the
PROGRAMMING BUTTON
to program a Sensor ID
and Max Sensitivity. Each button press will reset the menu timeout to 3 seconds.
After each programming menu, the IR-904 will play back the entered Sensor ID and
Max Sensitivity. If the user does not program a Sensor ID or Max Sensitivity, the
IR-904 will play back the default Sensor ID of 3, or the default Max Sensitivity of 5.
Sensor ID Menu:
The first menu is the Sensor ID menu. The default Sensor ID is ID-3. The user can
program a Sensor ID from 1 to 5 by pressing the
PROGRAMMING BUTTON
1 to 5
times. Approximately 2 seconds after powering up the IR-903, the
BLUE LED
will
illuminate for approximately 3 seconds. While the
BLUE LED
is illuminated, press
the
PROGRAMMING BUTTON
for the desired Sensor ID. The IR-903
BLUE LED
will
then play back the new programmed Sensor ID followed by the Sensitivity Level. If
the user does not program a Sensor ID, the IR-903 will play back the default
Sensor ID of 3. The Sensor ID is transmitted when the IR-903 detects a target.
The Sensor ID is used by
some
receivers to perform different functions.
