6
3. Scroll down
to “Time” and push OK.
4. Enter the correct Date and Time and push OK
5.
Scroll down to “Timestamp” and push “OK”, ensure ‘Timestamp’ is set to “Yes”. Then “Exit’.
5. Attach the camera to the small Canon military connector on the front of the system
case. Attach camera to Tree Mount Clip. Aim the camera at the target area. Camouflage
the camera, being careful of lens glare. Note: The camera has an automatic iris for light
level compensation and is pre-focused. The entire unit is water-resistant, but not
submersible.
6. The System II comes with two antennas. Select the desired antenna and attach to the
system’s SMA receptacle. If using the optional ANT-4 dipole antenna, tie off the antenna
to a small bush or hang it from a tree. Camouflage the antenna wire. For best results, try
to keep leaves and foliage away from the antenna. It makes no difference how the
antenna is oriented, but for best results, keep it in a vertical plane.
