Intellian WorldView s80HD, Инструкция по установке и эксплуатации

Страница: 84 / 157

s80HD WorldView™ – Marine Satellite Television System
84
1. Press the LEFT arrow key to move cursor to YES and press the OK key to enter
setup mode.
2. Press the DOWN arrow key to move cursor to SYSTEM and press the OK key to
enter
SYSTEM menu.
3. Press the RIGHT arrow key to move cursor to SET LOCATION and press the OK
key to enter
SET LOCATION menu
4.Set the ship’s GYRO TYPE* and BAUD RATE
A search pattern 1 or 3 will be initiated according to which GYRO TYPE is selected
and the existence of the gyrocompass input. Set the BAUD RATE as 4800, 9600,
19200 or 38400 according to your device.
A search pattern 1 will be initiated automatically if the gyrocompass input does not
exist and the gyrocompass type is selected other than GROUND TEST.
NOTE: The bow offset will not be saved automatically if Search 1 pattern is initiated.
In this case, the antenna will need to re target the desired satellite using Search 1
every time if the antenna restarts.
Setting the GPS and Gyrocompass
S E T U P M O D E ?
4
Y E S N O
+ A N T E N N A + S A T E L L I T E
4
+ S Y S T E M + I N S T A L L A T I O N
4
+ S E T L O C A T I O N + M A N A G E M E N T
+ K E Y L O C K
G Y R O T Y P E B A U D R A T E
N M E A 4 8 0 0
System Settings