Intellian GX60, Инструкция по установке и эксплуатации

Страница: 42 / 141

GX60 – Marine Satellite Communication System
42
PC to ACU Communication Setup
You can establish data communication between a PC and the ACU using one
of the following methods.
TCP/IP Connection
Connection through Front Panel Management Port
To connect the ACU to the PC through the Management Ethernet Port on the front
ACU panel, the network should be configured by setting up the PC IP before the
connection. This method requires separate IP configuration on a PC.
1.
Connect an Ethernet cable from a PC Ethernet port to the Management
-------- Port on the front of the ACU.
2. Go to Control Panel > Network and Sharing Center > Change Adapter
--------- Settings. Right-click on the Local Area Connection and click Properties.
3. Select TCP/ IPv4, and click Properties.
4. Change the network settings on a PC;
- Default IP: 192.168.1.5
- Subnet Mask: 255.255.255.0
- Gateway: 192.168.1.1
5.
Use the following IP address to access Intellian Aptus
®
or Aptus Web -----
-------- page.
- Default IP: 192.168.1.2
PC
Management
ethernet port