Intelix FLX-44, Инструкция по установке и эксплуатации

Страница: 21 / 28

FLX-44 Installation Guide
21
RS232 and TCP/IP Commands
RS232 Settings: 9600 baud, 8 Data bits, 1 Stop bit, Parity = None
TCP/IP Settings: User defined IP address, port 8080
There is either a period (.) or a semicolon (;) at the end of each command. These characters must be
present for the command to process correctly.
There are no spaces between any of the characters in the command string.
xx = Input Number (input 2 would be 02)
yy = Output Number (output 3 would be 03)
<CR> = Carriage return (Hex 0D)
<LF> = Line Feed (Hex 0A)
Routing Commands
Description Command Response
Route input xx to output yy xx B yy. AV: xx ->0 yy <CR><LF>
Route input xx to all outputs xx All. xx To All<CR><LF>
Route inputs to corresponding outputs All#. All Through.<CR><LF>
Route input xx to multiple outputs yy Number of
outputs is unlimited; each output must be
separated by a comma (,) xxByy,yy. xxVyy,yy<CR><LF>
Turn off all outputs All$. All Closed.<CR><LF>
Turn off specific output yy yy $. AV: yy Closed. <CR><LF>
Output yy routing status Status yy . V: xx->0yy<CR><LF>
Routing status of all inputs. Status. V: xx->0yy<CR><LF>
(Repeating sequence starting
with output 1, output 2, etc.)
Examples:
02All.
Route Video and Audio from input 2 to all outputs
04$. Turn off Video and Audio for output 4
02B03. Route Video and Audio from input 2 to output 3
03B02,04. Route Video and Audio from input 3 to outputs 2 and 4