FLX-44 Installation Guide
11
Remote RS232 Control via Routing
The FLX-44 has the logic to pass RS232 commands to remote devices through the TCP/IP or DE9 RS232
ports. The destination command string is embedded in a command which includes the destination
HDBaseT output port and baud rate. See page 21 for an example of the routed commands.
A compatible HDBaseT with control receiver is required to pass the control signals to the display devices.
Intelix recommends the DIGI-HD60C-R.
Apply Power
Plug the power supply into the power input port on the rear of the matrix (see page 6,
Rear Panel
, item
C). Connect the IEC power cable into the power supply. The matrix will turn on once the IEC cable is
plugged into AC power.
LCD Panel Boot-up Information
While the matrix is booting up, the front LCD panel will show the IP address of the matrix and the
current version of firmware. After five seconds, it will show Intelix FLX-44. The backlight will go dark
after five seconds. The information in the LCD panel can be customized (see page 15,
Interface Tab
).
Содержание FLX-44
Страница 26: ...FLX 44 Installation Guide 26 ...
Страница 27: ...FLX 44 Installation Guide 27 ...