Intelix DIGI-88FS, Инструкция по установке и эксплуатации

Страница: 20 / 32

DIGI-88FS Installation Guide
20
Below are the input EDID options.
1. Default - The default EDID (720p/60 with 2 channel PCM audio) is
passed to all video sources.
2. Port 1 - The EDID from output port 1 is passed to all video sources.
3. Remix - Uses the EDID of each connected display according to its
connection when the DIGI-88FS is first powered on, or immediately
after pressing 3 to select the remix option.
4. Customized - Automatically retrieves and saves the EDID settings of
a connected display to an input source.
Input and Output names will appear on the Connection Status screen.
Each entry has a Save button associated with it.
Each name can have a maximum of 16 characters. Supported characters
are: numbers (0-9), lower case letters (a-z), upper case letters (A-Z),
underscore (_), and hyphen (-).
The DIGI-88FS features Power On Detection mode, which will toggle the
matrix to automatically switch to the next powered-on device should an
HDMI source switch off. This feature is turned off by default.
While the default baud rate of the DIGI-88FS is 19200, other baud rates
are available to control the matrix via RS232: 9600, 38400, and 115200.
Change the IP address, subnet mask, and default gateway to match the
network settings. Click the Save button.
Website Timeout changes the length of time before the user has to login
to the web GUI again. 5min is the default.
Telnet Configuration allows the DIGI-88FS to be controlled via telnet. This
is enabled by default.
Setup Sub-Menu
Web
System
Port Name
EDID Mode Setting