Intelix DIGI-88FS, Инструкция по установке и эксплуатации

Страница: 12 / 32

DIGI-88FS Installation Guide
12
RS232 Control
The RS232 control port requires a standard straight-through serial cable for operation. The default settings for the
RS232 port are:
• 9600 baud
• 8 Data Bits
• 1 Stop Bit
• Parity = none
Connect a standard straight-through serial cable with DE9 connector
between the RS232 port on the DIGI-88FS and the controller.
TCP/IP (Telnet) Control
Connect the Ethernet cable between to the matrix and a router with
a straight-through cable or between the matrix and a computer
with a crossover cable.
The TCP/IP port requires a standard straight-through Category 5e
or greater cable with the TIA/EIA-568B crimp pattern for operation.
The default settings for the TCP/IP port are:
IP address: 192.168.0.178
Port: 23
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
1 2 3 4 5
9 8 7 6
2 = TX
3 = RX
5 = GND