Intelimax MA-2060, Руководство пользователя

Страница: 48 / 50

Intelimax LITE User Manual V1.02
- 48 -
E X T E N D E D / M O D E M S P E C I F I C A T
C O M M A N D S E T
Modem Config
Parameter Description
[E0]
Do not echo command set in command state or online command
state.
E1 Echo command set in command state or online command state.
[Q0] Return result codes.
Q1 Do not return result codes.
[&C0] DCD line always ON.
&C1
DCD line is ON during a circuit switched call. In IP Stack mode, the
behaviour is like &C0.
&C2
DCD line is normally ON and will toggle OFF for 1 second when the
circuit switched call is disconnected. In IP Stack mode, the
behaviour is like &C0.
&C3
DCD line is normally OFF and will be ON when modem has
successfully established a PPP Data (packet switched) call (only
applies to IP STACK mode). In Serial Modem mode, the behaviour is
like &C0.
&C4
DCD line is normally OFF and will be ON when modem has
successfully established a PPP Data and opened a socket with
remote server call (only applies to IP STACK mode). In Serial Modem
mode, the behaviour is like &C0.
[&D0] Ignore DTR line signal.
&D1
Enter online command state following ON-to-OFF transition of DTR
line while retaining the data connection.
&D2
Disconnect the data connection (only applies to Serial Modem
mode) and change to command mode. During OFF state of the
DTR line, the auto-answer function (see S0) is disabled. In IP Stack
mode, the behaviour is like &D1.
S0
[2], <1 to 255>
0
Automatic answering. [Enable automatic answering
after (Value) x 6 seconds.]
0: No auto- answering
Note : [ ] indicates default value.