Caution and safety
» LGPD - General Law for the Protection of Personal Data: Intelbras does not access,
transfer, capture, or perform any other type of treatment of personal data from
this product.
» Follow all instructions of the manual for product mounting and installation.
» This movement sensor is to be used in indoor environments.
» Do not touch on surface of the infrared sensor (PIR). If necessary, use a soft cloth
with alcohol to clean.
» The sensor must be installed where a possible intruder could be easily detected,
that is, where a person does transversal movements in relation to the sensor de-
tection beams when entering into the environment. The suggested installation
height is 4 m.
» Do not put objects in front of the sensor that may block scanning.
» Avoid installing the sensor near to the following interference sources: reflexive
surface, areas subject to sudden temperature changes (such as air conditioners
and heaters, fans, refrigerators and ovens).
» Avoid installing in places where sunlight goes directly onto the sensor.
» Install the sensor in a stable and shake-free place.
» For your safety, perform test of product and systems at least once a week. It is
necessary due to changes in environmental conditions, electronic failures or power
outage and flaws. Take all the required precautions to keep your property safe
and protected.
Top view scan
3 m
3 m
0 m
2 m
2 m
1 m
1 m
0 m
3 m
3 m
1 m
1 m
2 m
2 m
Upper view
