Mount the Access Point
Position each access point using the following guidelines and illustrations.
For best throughput and range, install the access point as high as practical.
Desktop or Table Top Location
Set the access point on a flat surface such as a table or desk. If the access
point is positioned on a desk or table, the antenna should be on top (as
shown above).
Wall or Ceiling Mounted Location
To install the mounting bracket on a hollow wall or ceiling, use the bracket to
position and drill holes for the toggle screws supplied, using a 3/8-inch drill
bit. Insert the bolt through the holes in the bracket, then screw on the toggle
piece.
Insert bolt and toggle through the hole.
The toggle will open on the
other side of the hole. Turn the bolt until the bracket is secure.
Install Mounting Bracket on Wall
Install Mounting Bracket on Ceiling
11
