background image

 

Error Messages List 

 

Message 

ID 

Type 

Message Description 

Probable Cause 

Suggested Action 

60006 Critical 

System shutting down 
due to high temperature 
on sensor (1, 2, or 3) 

Fan in the system is not 
functioning or room tem-
perature is too high 

Make sure the fan in the 
system is working properly 
and the room temperature 
is not too high 

60010 Warning 

System upgraded from 
[%1] to [%2] 

Firmware of the system 
has been upgraded 

Make sure the firmware 
upgrade is an intended ac-
tion 

60003 Warning 

The storage space for 
backup is [%1] full. 
(Threshold is [%2]) 

The storage space for 
backup is almost full. 

Review your storage utiliza-
tion to make some rooms 
for backup. 

60004 Warning 

The storage space for 
NAS is [%1] full. 
(Threshold is [%2]) 

The allocated space for 
Shared Folder is almost 
full 

You can expand the shared 
folder size from the Ad-
vanced -> Disks link. 

NOTE: 

This action is dis-

tructive. Backup data before 
expanding the folder size. 

60005 Warning 

The storage space in 
USB device(s) is [%1] 
full. (Threshold is [%2]) 

The storage space in the 
connected USB device is 
almost full 

You can either make some 
room in the USB device, or 
disconnect the USB device 

N/A Critical 

Network connection lost 
(Port %s) 

Network connection of the 
specified port has been 
lost 

Please check your network 
connections (including the 
cable, switch/hub) are se-
cured 

60210 Warning 

Shared folder [%1] now 
unavailable to [%2] 

The privilege for the 
specified user to access 
the previously assigned 
shred folder has been 
removed 

Make sure the privilege 
change is an intended ac-
tion 

60212 Warning 

Shared folder [%1] now 
unavailable to ma-
chine(s) [%2] 

The privilege for the 
specified computer to ac-
cess the previously as-
signed shred folder has 
been removed 

Make sure the privilege 
change is an intended ac-
tion 

60011 Warning 

Disk [%1] has been 
removed 

The disk has been re-
moved or broken 

Make sure removing disk is 
an intended action 

60014 Warning Storage 

initializing 

RAID has been configured 
and is initializing 

Please wait till the initializa-
tion is completed 

60017 Warning 

Disk error -- storage 
now operating in de-

One or more disks in the 
RAID set might be dam-

Please contact your disk 
manufacturer to get the 

Содержание SS4000-E - Entry Storage System NAS Server












Отзывы: