Intel SRCSAS18E - RAID Controller, Руководство пользователя, Страница: 39 / 44

Intel® RAID Controller SRCSAS18E User’s Guide 20
Characteristics
Table 3 shows the general characteristics for the RAID Controller SRCSAS18E.
The RAID Controller SRCSAS18E ensures data integrity by intelligently validating the
compatibility of the SAS domain.
J7 Set Mode 0 2-pin
connector
Mode 0 holds the I/O processor in reset to allow
firmware recovery.
No jumper: Normal operational mode.
Jumper: Mode 0 for firmware recovery. Requires a
firmware recovery utility and firmware image file.
J10 Dirty cache LED 2-pin
connector
Connect to enclosure LED to indicate data in
cache has not been written to disk.
J15 Debug header 4-pin
connector
Factory debug use only
J18 I
2
C SES2 4-pin keyed
connector
SES2 OOB enclosure management
Table 2. Jumper Descriptions
Jumper Description Type Comments
Table 3. Card Characteristics
Flash
ROM
1
1. For boot code and firmware.
2. NCQ is available only with TA D46199-003 or later.
SAS Data
Transfers
NVRAM
SATA2
Features
SAS
Features SAS 1.0 SAS 1.1 SATA 1.0
Yes Up to 3 Gbits/s
per lane
Yes • 3 Gbits/s
SATA
• Staggered
spin-up
• Hot-plug
• Native
command
queing
(NCQ)
2
• Activity
and fault
indicators
• Port
selector
PSP,
SMP,
STD
Yes Yes Yes