Intel SR1630GP - Server System - 0 MB RAM, Руководство по обслуживанию

Страница: 92 / 196

70 Intel
®
Server System SR1630GP / SR1630HGP Service Guide
16. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
17. Plug all peripheral devices and the AC power cable into the server.
Installing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
“Removing the Server
System Cover” on page 30 .
4. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 33 .
5. Remove the PCIe* Riser assembly. For instructions, see “Removing the PCIe*
Riser Assembly” on page 61 .
6. Place the server board into the server system as shown by letter “A” in Figure 57.
7. Attach the server board with nine screws. See letter “B” in Figure 57.