Intel SR1630GP - Server System - 0 MB RAM, Руководство по обслуживанию, Страница: 54 / 196

32 Intel
®
Server System SR1630GP / SR1630HGP Service Guide
Installing the Server System Cover
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. SR1630GP: Place the cover over the server system so that the side edges of the
cover sit just inside the server system sidewalls. Slide the cover forward. See letter
“A” in Figure 18.
3. SR1630GP: Tighten the screw at the rear of the server. See letter “B” in Figure 18.
4. SR1630GP: Install the two screws at the front of the server. See letter “C” in
Figure 18.
Figure 18. Installing the Server System Cover (SR1630GP)
5. SR1630HGP: Place the cover over the server system so the side edges of the cover
sit just inside the server system sidewalls. Slide the cover forward. See letter “A” in
Figure 19.
6. SR1630HGP: Install the four screws at the front of the server. See letter “B” in
Figure 19.
A
C
AF000663
B