Intel SE7505VB2, Спецификация

Страница: 93 / 108

Intel® Server Board SE7505VB2 BIOS
10.3 Error Handling and Reporting
10.3.1 POST Error Beep Codes
Table 67. POST Error Beep Codes
Beeps Reason
4-3-1-2 No memory DIMM(s)
4-3-1-3 Memory type is mismatch
4-3-1-4 No DIMM Pair(s) in System
Memory Error Row Address Bits
4-3-3-2 Memory Error Internal Banks
4-3-3-3 Memory Error Timing
4-3-3-4 Memory Error Register CAS 3
4-3-4-1 Memory Error Register NonReg Mix
4-3-4-2 Memory Error CAS Latency
4-3-4-3 Memory Error Size Not Supported
1-3-4-3 Memory Failure prior to 4MB
4-3-3-1
10.3.2 BIOS Event Log
The SE7505VB2 contains a small amount of space in the BIOS to record errors or failures
during post. Below is a table of these events and their meaning:
Table 68. BIOS Event Log Error Messages
The event The Event Log Message Post Code
Timer failed Channel 2 Timer Not Functional A0h
CMOS Battery Failure CMOS Battery Failure 09h
CMOS Checksum Error CMOS Checksum Error 09h
Floppy failure Floppy Drive A Error 8Ch
Keybord stuck key Keyboard not functional – stuck key 52h
Keyboard not functional Keyboard not functional 70h
The keyboard controller failed Keyboard Controller not functional 70h
The memory size decreased Memory size decreased C2h
Invalide date and time of RTC CMOS Time not set 09h
Different speed of CPUs Different speed of CPUs installed 70h
Different type of CPUs Different type of CPUs installed 70h
CPU BIST failed CPU BIST failure 93h
Invalid NIC 1 (100Mb) Invalid NIC1 (100Mb) SSID/SSVID 70h
Single bit error Correctable memory errors After 62h (uses SMI to log event)
Multiple bit error Un-correctable memory errors After 62h
Revision 1.2
Intel part number C32194-002
93