manualshive.com logo in svg

Intel SC450NX - Server Platform - 0 MB RAM, Руководство по эксплуатации продукта

"Intel SC450NX - Server Platform - 0 MB RAM" - это универсальная серверная платформа, для которой доступно руководство по эксплуатации. Вы можете скачать бесплатное руководство по эксплуатации продукта с нашего веб-сайта. Посетите manualshive.com, чтобы скачать его сегодня!

Поделиться
Скачать
background image

75

Creating the BIOS Upgrade Diskette

The BIOS upgrade file is a compressed self-extracting archive that contains the files you need to
upgrade the BIOS.

1.  Copy the BIOS upgrade file to a temporary directory on your hard disk.
2.  From the C:\ prompt, change to the temporary directory.
3.  To extract the file, type the name of the BIOS upgrade file, for example:

10006BI1.EXE

4.  Press <Enter>.  The extracted file contains the following files:

LICENSE.TXT

README.TXT

BIOS.EXE

5.  Read the LICENSE.TXT file, which contains the software license agreement, and the

README.TXT file, which contains the instructions for the BIOS upgrade.

6.  Insert the bootable diskette into drive A.
7.  To extract the BIOS.EXE file to the diskette, change to the temporary directory that holds the

BIOS.EXE file and type:

BIOS A:

8. Press 

<Enter>.

9.  The diskette now holds the BIOS upgrade and recovery files.

Upgrading the BIOS

1.  Boot the computer with the diskette in drive A.  The BIOS upgrade utility screen appears.
2.  Select Update Flash Memory From a File.
3.  Select Update System BIOS.  Press <Enter>.
4.  Use the arrow keys to select the correct .bio file.  Press <Enter>.
5.  When the utility asks for confirmation that you want to flash the new BIOS into memory,

select Continue with Programming.  Press <Enter>.

6.  When the utility displays the message upgrade is complete, remove the diskette.  Press

<Enter>.

7.  As the computer boots, check the BIOS identifier (version number) to make sure the upgrade

was successful.

8.  To enter the Setup program, press <F2> when you see the message:

Press <F2> Key if you want to run SETUP

9.  For proper operation, load the Setup program defaults.  To load the defaults, press <F9>.
10.  To accept the defaults, press <Enter>.
11.  Set the options in the Setup program to the settings you wrote down before the BIOS upgrade.
12.  To save the settings, press <F10>.
13.  To accept the settings, press <Enter>.
14.  Turn off the computer and reboot.

Содержание SC450NX - Server Platform - 0 MB RAM









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SC450NX - Server Platform - 0 MB RAM

TANDBERG VCS Administration Manual preview
VCS
Бренд: TANDBERG Страницы: 187
i3 International SRX-Pro Server Quick Start Manual preview
SRX-Pro Server
Бренд: i3 International Страницы: 2
Velleman VWS2E Manual preview
VWS2E
Бренд: Velleman Страницы: 17
Yawarra net5501 Quick Start Manual preview
net5501
Бренд: Yawarra Страницы: 4
HMS Networks Intesis IBMBSDAL0640000 User Manual preview
Intesis IBMBSDAL0640000
Бренд: HMS Networks Страницы: 39
Supero SuperServer 5013G-M User Manual preview
SuperServer 5013G-M
Бренд: Supero Страницы: 104
Acer Aspire EASYSTORE H341 Quick Start Manual preview
Aspire EASYSTORE H341
Бренд: Acer Страницы: 59
Acer Aspire EASYSTORE H341 Service Manual preview
Aspire EASYSTORE H341
Бренд: Acer Страницы: 74
Acer Aspire EasyStore Series User Manual preview
Aspire EasyStore Series
Бренд: Acer Страницы: 148
Acer Aspire easyStore H340 Service Manual preview
Aspire easyStore H340
Бренд: Acer Страницы: 68
Acer Altos EasyStore User Manual preview
Altos EasyStore
Бренд: Acer Страницы: 169
Acer Aspire easyStore H340 User Manual preview
Aspire easyStore H340
Бренд: Acer Страницы: 148
Acer Altos EasyStore Quick Installation Manual preview
Altos EasyStore
Бренд: Acer Страницы: 7
Dell PowerEdge 400SC Update preview
PowerEdge 400SC
Бренд: Dell Страницы: 1
HP ProBook 4320t Administrator'S Reference Manual preview
ProBook 4320t
Бренд: HP Страницы: 94
HP Integrity rx5670 Site Preparation Manual preview
Integrity rx5670
Бренд: HP Страницы: 46
HP mt245 Maintenance And Service Manual preview
mt245
Бренд: HP Страницы: 98
HP NetServer AA 4000 Installation Manual preview
NetServer AA 4000
Бренд: HP Страницы: 82

Бренды по названию

Популярные бренды

Загрузить еще бренды