Intel S5500BC страница 48 Скачать руководство пользователя

Страница: 48 / 86

Intel

Server Board S5500BC User’s Guide

Note:

Do not skip Step 2. You need these settings to configure your computer at the end of the

procedure.

Obtaining the Upgrade

Download the BIOS image file to a temporary folder on your hard drive. Refer to

“Additional Information and Software”

for a link to the update software.

Note:

Before attempting a BIOS upgrade, review the instructions and release notes provided in

the README file distributed with the BIOS image. Review also any release notes in the

release notes file that accompany the new version of the BIOS. The release notes may

contain critical information regarding jumper settings, specific fixes, or other information

to complete the upgrade.

Upgrading the BIOS

Follow the instructions in the readme file that came with the BIOS upgrade. When the

upgrade completes, remove the bootable media from which you performed the upgrade.

Caution:

Do not power down the system during the BIOS upgrade process! When the BIOS upgrade

is completed, the system resets automatically.

Note:

You may encounter a CMOS Checksum error or other problems after reboot. If this

happens, shut down the system and re-boot. CMOS checksum errors require that you enter

Setup, check your settings, save your settings, and exit Setup.

BIOS Recovery Mode and BIOS Flash Update

If an update to the system BIOS is not successful or if the system fails to complete POST

and the BIOS is unable to boot an operating system, it may be necessary to run the BIOS

recovery procedure.

To place the baseboard into recovery mode, move the boot option jumper (located on the

baseboard) to the recovery position. The BIOS can then execute the recovery BIOS (also

known as the boot block) instead of the normal BIOS. This is the mode of last resort, used

only when the main system BIOS will not boot.

In recovery mode operation, the boot block will execute and start an EFI shell to allow the

system to run iFlash to update the system BIOS.

Note:

The entire process takes two to four minutes.

Recovering the BIOS

The following steps boot the recovery BIOS and flashes the normal BIOS:

Содержание S5500BC























































































Результаты поиска

Содержание S5500BC

Отзывы:

Похожие инструкции для S5500BC

Бренды по названию

Популярные бренды

Intel S5500BC, Руководство пользователя

Результаты поиска

Содержание S5500BC

Отзывы:

Похожие инструкции для S5500BC

Бренды по названию

Популярные бренды