manualshive.com logo in svg

Intel S3420GPRX, Руководство пользователя

Поделиться
Скачать
Intel S3420GPRX Скачать руководство пользователя страница 65

52

Intel® Server Board S3420GPRX User Guide

For questions related to the EMC performance of this product, contact:

Intel Corporation

5200 N.E. Elam Young Parkway

Hillsboro, OR 97124-6497

1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment to an outlet on a circuit other than the one to which the 
receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the grantee of this device could 
void the user's authority to operate the equipment. The customer is responsible for 
ensuring compliance of the modified product.

Only peripherals (computer input/output devices, terminals, printers, etc.) that comply 
with FCC Class A or B limits may be attached to this computer product. Operation with 
noncompliant peripherals is likely to result in interference to radio and TV reception.

All cables used to connect to peripherals must be shielded and grounded. Operation with 
cables, connected to peripherals, that are not shielded and grounded may result in 
interference to radio and TV reception.

ICES-003 (Canada)

Cet appareil numérique respecte les limites bruits radioélectriques applicables aux 
appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur: 
“Apparelis Numériques”, NMB-003 édictee par le Ministre Canadian des 
Communications.

This digital apparatus does not exceed the Class A limits for radio noise emissions from 
digital apparatus set out in the interference-causing equipment standard entitled: “Digital 
Apparatus,” ICES-003 of the Canadian Department of Communications.

Содержание S3420GPRX















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды