Intel S3000AH Скачать руководство пользователя страница 55

Страница: 55 / 74

Appendix B: Regulatory and

Compliance Information

Product Regulatory Compliance

Product Safety Compliance

The Intel

Server Board S3000AH complies with the following safety requirements:

•

UL60950 - CSA 60950 (USA / Canada)

•

EN60950 (Europe)

•

IEC60950 (International)

•

CB Certificate & Report, IEC60950 (report to include all country national
deviations)

•

GOST R 50377-92 - Listed on one System License (Russia)

•

Belarus License - Listed on System License (Belarus)

•

CE - Low Voltage Directive 73/23/EEE (Europe)

•

IRAM Certification (Argentina)

Product EMC Compliance - Class A Compliance

Note: Legally this product is required to comply with Class A emission requirements as it is

intended for a commercial type market place. Intel targets 10db margin to Class A Limits.

The Intel

Server Board S3000AH has been has been tested and verified to comply with

the following electromagnetic compatibility (EMC) regulations when installed a
compatible Intel

host system. For information on compatible host system(s) see Intel's

Server Builder Web site or contact your local Intel representative.

•

FCC /ICES-003 - Emissions (USA/Canada) Verification

•

CISPR 22 - Emissions (International)

•

EN55022 - Emissions (Europe)

•

EN55024 - Immunity (Europe)

•

CE - EMC Directive 89/336/EEC (Europe)

•

AS/NZS 3548 Emissions (Australia / New Zealand)

•

BSMI CNS13438 Emissions (Taiwan)

•

GOST R 29216-91 Emissions - Listed on one System License (Russia)

Содержание S3000AH











































































Результаты поиска

Содержание S3000AH

Отзывы:

Похожие инструкции для S3000AH

Бренды по названию

Популярные бренды

Intel S3000AH, Руководство пользователя

Результаты поиска

Содержание S3000AH

Отзывы:

Похожие инструкции для S3000AH

Бренды по названию

Популярные бренды