manualshive.com logo in svg

Intel RX87Q, Руководство пользователя

Поделиться
Скачать
Intel RX87Q Скачать руководство пользователя страница 27

 

27

1.6.2

 

  Installing the CPU Heatsink and Fan 

The Intel LGA1150 processor requires a specially designed heatsink and fan assembly to ensure optimum 

thermal condition and performance. 

•   When you purchase a boxed Intel® processor, the package includes the CPU fan and 

heatsink assembly. If you buy a CPU separately, make sure that you only use 

Intel®-certified multi-directional heatsink and fan. 

•   Your Intel® LGA1155 heatsink and fan assembly comes in a push-pin design and requires 

no tool to install. 

•   If you purchased a separate CPU heatsink and fan assembly, make sure that: 

   a. The CPU heatsink and fan assembly is designed to withstand the “TDP” (Thermal 

Dissipation Power) specified by Intel specification of corresponding CPU that you are 

going to install.   

   b. You have properly applied an even layer of “Thermal Interface Material” to between 

the CPU heatsink and the top of CPU before you install the heatsink and fan assembly 

(please check with your CPU fan/heatsink vendor for details). 

 

NOTE:

   

Make sure that you have installed the mainboard to the chassis before you install             

 

the CPU fan and heatsink assembly. 

 

To install the CPU heatsink and fan: 

1.  Place the CPU heatsink on top of the installed CPU, make sure that the four fasteners are line-up 

with the four “motherboard hole” around the CPU socket. 

 

 

 

 

 

 

 

 

 NOTE:

 

Orient the heatsink and fan assembly so the CPU fan cable is close to the   

 

 

CPU fan connector). 

 

    Make sure to orient each fastener with the narrow end of the groove pointing outward.   

    (The photo shows the groove shaded for emphasis.) 

Содержание RX87Q




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды