background image

 

2

FCC Statement

 

THIS DEVICE SUPPORTS PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO 

CONDITIONS: 

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. 

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE 

UNDESIRED OPERATION. 

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, 

PURSUANT TO PART 15 OF THE FCC RULES. 

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE 

EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE 

RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, 

MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. 

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH 

CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE. 

 

Notice 

This guide is designed for experienced users to setup the system within the shortest time. For detailed 

information, please always refer to the electronic user's manual. 

 

Copyright Notice 

Copyright 

 2011 BCM Advanced Research, ALL RIGHTS RESERVED. 

No part of this document may be reproduced, copied, translated, or transmitted in any form or by any 

means, electronic or mechanical, for any purpose, without the prior written permission of the original 

manufacturer. 

 

Trademark Acknowledgement 

Brand and product names are trademarks or registered trademarks of their respective owners. 

 
 
 
 
 
 
 
 

Содержание RX87Q




















































Отзывы: