Theory of Operation
Intel® RFID Sensor Platform (Intel® RSP)
2019Q2
Installation & User Guide
Page: 34
338088-002
fixed_q_value
The fixed Q value to use (valid when q_algorithm = Fixed).
The valid range of this parameter is 0 – 15.
repeat_until_no_tags
Specifies whether or not the singulation algorithm should
continue until no more tags are singulated.
The valid values are “true" or “false".
start_q_value
The initial Q value to use at the beginning of an inventory
round (valid when q_algorithm = Dynamic).
The valid range of this parameter is 0 – 15.
min_q_value
The minimum Q value that would ever be used during an
inventory round (valid when q_algorithm = Dynamic).
The valid range of this parameter is 0 – 15.
max_q_value
The maximum Q value that would ever be used during an
inventory round (valid when q_algorithm = Dynamic).
The valid range of this parameter is 0 – 15.
threshold_multiplier
A 4X multiplier applied to the Q-adjustment threshold as
part of the dynamic-Q algorithm.
The valid range of this parameter is 0 – 255.
retry_count
The number of times to try another execution of the
singulation algorithm before either toggling the target flag
or terminating the operation.
The valid range of this parameter is 0 – 255.
toggle_target_flag
Specifies whether or not to toggle the targeted flag.
The valid values are “true" or “false".
toggle_mode
When toggle_target_flag is true, this value specifies when to
toggle the targeted flag. The valid values are “None”,
“OnInvCycle", OnInvRound”, or “OnReadRate".
perform_select
Specifies whether or not to perform a select command
based on the previously configured criteria
The valid values are “true" and “false".
perform_post_match
Specifies whether or not to perform a post singulation
match based on the previously configured criteria.
The valid values are “true" and “false".
filter_duplicates
Specifies whether or not the Intel® RFID Sensor Platform
should filter out duplicate tag information before sending to
the Intel® RSP Gateway. The valid values are “true" or “false".
auto_repeat
Specifies whether or not to continue performing inventory
rounds until the “stop_inventory" command is received.
When this value is "No", an "inventory_complete" indication
will be sent from the Intel ® RFID Sensor Platform to the
Gateway at the end of the inventory round.
The valid values are “true" and “false".
delay_time
The amount of time (ms) that the transmitter is turned off
between subsequent inventory rounds. Used when
"auto_repeat" is true to control the transmit duty cycle.
The valid range is 0 – 65535.
