Intel Raid Controller, Руководство пользователя

Страница: 9 / 26

Intel
®
Raid Controller SRCS28X User Manual 9
Preface
keep them evenly aligned to avoid bending any connector pins. Also, before you connect a
cable, make sure both connectors are correctly oriented and aligned.
•
Handle components and cards with care. Don’t touch the components or contacts on a card.
Hold a card by its edges or by its metal mounting bracket. Hold a component such as a
microprocessor chip by its edges, not by its pins.
1.3.3 Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside your computer. To prevent static damage,
discharge static electricity from your body before you touch any of your computer’s electronic
components, such as the microprocessor. You can do so by touching an unpainted metal surface,
such as the metal around the card-slot openings at the back of the computer.
As you continue to work inside the computer, periodically touch an unpainted metal surface to
remove any static charge your body may have accumulated. In addition to the preceding
precautions, you can also take the following steps to prevent damage from electrostatic discharge
(ESD):
•
When unpacking a static-sensitive component from its shipping carton, do not remove the
component from the antistatic packing material until you are ready to install the component in
your computer. Just before unwrapping the antistatic packaging, be sure to discharge static
electricity from your body.
•
When transporting a sensitive component, first place it in an antistatic container or packaging.
Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads and
workbench pads.