Intel Raid Controller, Руководство пользователя

Страница: 12 / 26

12 Intel
®
Raid Controller SRCS28X User Manual
Introduction
2.1.1 Adapter Description
The Intel
®
Raid Controller SRCS28X is a half-size storage adapter (6.875” x 4.2”) that provides
support for eight Serial ATA ports. You can attach a daughtercard to provide battery backup
support.
The Intel
®
Raid Controller SRCS28X uses an Intel 80331 I/O Processor to support the Serial ATA
ports. The Intel 80331 I/O Processor provides the intelligent RAID management capabilities. The
Intel
®
Raid Controller SRCS28X supports RAID 0, 1, 5, 10, and 50.
2.1.2 Enclosure Management
In addition, the Intel
®
Raid Controller SRCS28X offers enclosure management through the same
protocols used for SCSI Accessed Fault-Tolerant Enclosures (SAF-TE), using an I
2
C interface to
communicate with the storage enclosure processor (SEP). This feature allows you to use RAID
capabilities provided by the Intel
®
Raid Controller SRCS28X in an enclosure containing your hard
drives.
The Intel
®
Raid Controller SRCS28X uses the SAF-TE command protocol to communicate control
and status with the storage enclosure processor (SEP). The SAF-TE protocol defined in the SATA
II specification is used to communicate or perform SAF-TE operations such as setting the drive
state and turning off/on LED with the SEP device. SEP is a micro controller resides on SATA
backplane. It senses drive inserted status, drive activity and status LEDs near each hard drive slot.
The drive status is reported and LED control performed according to commands through I2C bus.
LEDs are located on the backplane near each hard drive slot.
2.1.3 Operating System Support
The Intel
®
Raid Controller SRCS28X supports several major operating systems. Intel provides
device drivers and RAID management tools for operating systems on the resource CD that
accompanies the Intel
®
Raid Controller SRCS28X.
In addition, you can download the latest drivers and software on the Intel support web site: http://
www.support.intel.com .
Refer to the Software User’s Guide on the Resource CD for instructions for installing the device
drivers. Be sure to use the latest Service Packs provided by the operating system manufacturer and
review the
readme
file that accompanies the driver.
The Intel
®
Raid Controller SRCS28X supports the following operating systems:
•
Microsoft* Windows* XP
•
Microsoft* Windows* 2000
•
Microsoft* Windows Server* 2003
•
Novell* NetWare*
•
Red Hat* Linux*, and
•
SuSE* Linux*
Note: The operating systems supported by this controller may not be supported by your server board.
Please refer to the tested OS list for your server board at
http://support.intel.com/support/