Intel NUC Kit DE3815TYKHE User Guide
7
Install a 2.5” SSD or Hard Drive
For a list of tested 2.5” hard drives, go to the
page on the Support site.
Follow these instructions to install a 2.5” Solid State Drive (SSD) or Hard Disk Drive (HDD):
1.
Observe the precautions in "Before You Begin" on page 2.
2.
Remove the two screws securing the drive bay in the chassis and lift up the drive bay assembly (A).
3.
Slide the 2.5” drive into the drive bay (B) and secure it with screws (C). Ensure the SATA connectors
are fully seated into the connectors of the SATA daughter card (D).
