Intel NUC 8 Pro NUC8i3PN, Руководство пользователя

Страница: 8 / 19

8
NUC8v7PN, NUC8v5PN, NUC8i3PN
User Guide
– January 2020
3.0 Upgrade System Memory
All Intel NUC8 PRO models have two 260-pin DDR4 SO-DIMM memory slots.
To upgrade memory, be sure to select memory modules that meet these
requirements:
• 1.2V low voltage memory
• 1866/2133/2400 MHz SO-DIMMs
• Non-ECC
Find compatible system memory modules at the Intel® Product Compatibility Tool:
•
NUC8v7PN
•
NUC8v5PN
•
NUC8i3PN
NOTE If you plan to install only one memory module, install it in the lower
memory socket.
3.1 Upgrade to Different Memory
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer.
3. Turn off the computer and disconnect the power cord.
4. Remove the computer’s bottom chassis cover.
5. Remove the pre-installed memory module
a.
Gently spread the retaining clips at each end of the memory socket, which
causes the module to pop out of the socket (C).
b. Holding the module by the edges, lift it away from the socket, and
store it in an anti-static package.
6. Install the new memory module
a.
Align the small space at the bottom edge of the memory module
with the key in the socket.
b. Insert the bottom edge of the module at a 45 degree angle into
the socket (A).
c. When the module is inserted, push down on the outer edges of
the module until the retaining clips snap into place (B). Make sure
the clips are firmly in place (C).