manualshive.com logo in svg

Intel NEXXUS4080AL, Руководство пользователя, Страница: 58 / 70

Поделиться
Скачать
Intel NEXXUS4080AL Скачать руководство пользователя страница 58

46

NEXXUS4080AL

 User’s Guide

•

Does this video monitor work correctly if plugged into a different system?

System Cooling Fans Do Not Rotate Properly

If the system cooling fans are not operating properly, it is an indication of possible system 
component failure.

Check the following:

•

Is the power-on light lit? If not, see 

“Power Light Does Not Light”

.

•

If your system has LED lights for the fans, is one or more of these LEDs lit?

•

Are any other control panel LEDs lit?

•

Have any of the fan motors stopped? Use the server management subsystem to 
check the fan status.

•

Have your fans speeded up in response to an overheating situation?

•

Have your fans speeded up in response to a fan that has failed?

•

Are the fan power connectors properly connected to the server board?

•

Is the cable from the control panel board connected to the both the control panel 
board and to the server board?

•

Are the power supply cables properly connected to the server board?

•

Are there any shorted wires caused by pinched-cables or have power connector 
plugs been forced into power connector sockets the wrong way?

Drive Activity Light Does Not Light

Check the following:

•

Are the drive's power and signal cables properly installed?

•

Are all relevant switches and jumpers on the drive set correctly?

•

Is the drive properly configured?

•

Is the drive activity light always on? If so, the signal cable may be plugged in 
incorrectly.

CD-ROM Drive or DVD-ROM Drive Activity Light Does Not 
Light

Check the following:

•

Are the CD-ROM/DVD-ROM drive's power and signal cables properly installed?

•

Are all relevant switches and jumpers on the drive set correctly?

•

Is the drive properly configured?

Содержание NEXXUS4080AL







































































Отзывы:

Нет отзывов