Intel NEXXUS4080AL Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 70

Intel NEXXUS4080AL Скачать руководство пользователя страница 2

ii

NEXXUS4080AL

User’s Guide

Disclaimer

Information in this document is provided in connection with

VXTECH

products. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in

VXTECH

's

Terms and Conditions of Sale for such products,

VXTECH

assumes no liability whatsoever, and

VXTECH

disclaims any

express or implied warranty, relating to sale and/or use of

VXTECH

products including liability or warranties relating to

fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right.

VXTECH

products are not designed, intended or authorized for use in any medical, life saving, or life sustaining

applications or for any other application in which the failure of the Intel product could create a situation where
personal injury or death may occur.

VXTECH

may make changes to specifications and product descriptions at any time,

without notice.

VXTECH

server boards contain a number of high-density VLSI and power delivery components that need adequate

airflow for cooling.

VXTECH

's own chassis are designed and tested to meet the intended thermal requirements of these

components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use

VXTECH

developed server building blocks to consult vendor datasheets and operating parameters to

determine the amount of airflow required for their specific application and environmental conditions.

VXTECH

can not be held responsible if components fail or the server board does not operate correctly when used outside any
of their published operating or non-operating limits.

NEXXUS4000

are trademarks or registered trademarks of

Ciara Technologies

or its subsidiaries in

the

Canada

and other countries.

* Other names and brands may be claimed as the property of others.

Copyright © 2006,

VXTECH

. All Rights Reserved

«
1
2
3
4
...
»

Содержание NEXXUS4080AL







































































Отзывы:

Нет отзывов