Intel® Server System M20NTP1UR - System Integration and Service Guide
26
2.4
Memory Module Installation
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
Note:
See
for general memory population rules.
2.4.1
DIMM Installation
1.
Remove the DIMM blank from the desired memory slot (See
Figure 18. DIMM Blank Removal
•
Open the ejection tabs at both ends of the selected memory slot to lift the DIMM blank from
the slot (see Letter “A”).
•
Carefully remove the DIMM Blank from the system (see Letter “B”).
Note
: DIMM Blanks should only be removed when being replaced with a memory module
2.
Carefully unpack the memory module, taking care to only handle the device by its outer edges.
3.
Install the memory module to the server board (See
Figure 19. Memory Module Installation
•
Ensure that the ejection tabs at both ends of the memory slot are pushed outward to the open
position (see Letter “A”).
Содержание M20NTP1UR
