background image

Intel

®

 IXDP465 Development Platform—Quick Start Guide

May 2005

Intel

®

 IXDP465 Development Platform

AN

6

Order Number: 305825, Revision: 002

3.0

Known Issues

Known issues are described in the following documents:

Silicon errata: 

Intel

®

 IXP4XX Product Line of Network Processors Specification Update 

Software errata: 

Intel

®

 IXP400 Software - Software Specification Update

Platform errata: 

Intel

®

 IXDP465 Development Platform Specification Update

4.0

Inspection 

Before the contents of the box are unpacked, ensure that all precautions are observed prior to 
removing Electrostatic Sensitive Device (ESD) assemblies from their protective packaging.

Unpack the contents of the box. After all the components are unpacked, verify that all the items 
listed in the packing list are present. The packing list is included in the STOP Readme First 
document shipped with the kit. If any item is missing, refer to 

Section 12.0, “Technical Support”

 

for instructions. 

After verifying all items are present: 

Inspect each item for any visible damage. 

Inspect the cable connectors to ensure that none of the pins are bent or damaged. 

Inspect the overall platform assembly to ensure that all mezzanine cards (modules) are 
properly seated. This can be done by first ensuring that all four 5/8 inch standoffs and nuts on 
each corner of the mezzanine cards are not loose. If they appear loose either due to shipping or 
previous handling, then they need to be re-seated per the following procedure:

a. Remove all four nuts, by hand-turning them in a counter-clockwise direction as viewed 

from the top of the assembly.

b. Ensure that all four 5/8 inch standoffs are tight, by hand-turning each of them in a 

clockwise direction while the mezzanine card is still plugged in.

Intel

®

 IXP4XX Product Line of Network Processors 

Specification Update

306428

Intel Representative

Intel

®

 IXP45X and Intel

®

 IXP46X Product Line of Network 

Processors Datasheet

306261

Documentation Web Page

Intel

®

 IXP45X and Intel

®

 IXP46X Product Line of Network 

Processors Developer’s Manual

306262

Documentation Web Page

Intel

®

 IXP400 Software Release - Software Release Notes

N/A

Software Web Page

††

Intel

®

 IXP400 Software - Software Specification Update

273795

Documentation Web Page

Intel

®

 IXP400 Software Programmer’s Guide

252539

Documentation Web Page

Table 1. 

Reference Documents (Sheet 2 of 2)

Title

Document 

Number

Location

This document is available at: 

http://www.intel.com/design/network/products/npfamily/docs/ixp4xx.htm 

††

This document is available at: 

http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm

Содержание IXDP465























Отзывы: