18
ISP2150 2U Rack Server Platform Quick Start Guide
Installing the Front Bracket and Racking Your System
The ISP2150 system comes with mounting bracket hardware that allows you to install it into cabinets and
relay racks. The following procedures describe how to mount the ISP2150 system in each type of chassis.
CAUTION
Some racks and cabinets may not support the installation of the system. Before installing the
system, be sure to refer to the specifications provided by the manufacturer to insure proper
mounting configurations and maximum specified loads for the rack or cabinet are not exceeded.
Installing the Front Bracket in a Cabinet
1.
Attach the left and right front brackets
to the system. Your system comes
with left and right front brackets (A)
and mounting bolts (B) to attach them
to the system. Mount the brackets to
the sides of the system with the bracket
flange flush with the front panel.
2.
Attach the rear support washer to the
system. The system also comes with
two support washers (C). Mount one
on each side towards the rear panel of
the system.
B
A
C
OM09334
