ISP2150 2U Rack Server Platform Quick Start Guide
13
Installing a Hard Drive
OM09317
B
A
Your server does not include a hard
drive. You must purchase them
separately and install them. The
server has four hot-swappable SCSI
hard drive bays.
1.
Remove the drive carrier(s) from
the drive bays by unclipping the
retention lever on the right side of
the handle. Pull the retention
lever toward you until the tab end
(B) of the lever is free of the
housing slot (A). Pull the drive
forward and out of the housing.
2.
Remove the hard drive from its
wrapper and place it on an anti-
static surface.
OM09323
C
A
E
B
D
3.
Remove and save the four screws
(D) from the drive carrier/drive
slide track.
4.
Align the drive holes to the holes
in the drive carrier slide track (C),
insert the screws that you
previously removed, and attach
the carrier (B) to the drive (A).
Make sure that the connector end
of the drive (E) is facing the back
of the carrier and the drive top is
facing upward before inserting the
screws.
5.
Slide the carrier/drive into the
chassis with the retention
mechanism extended in the open
position, then push the arm
towards the front of the chassis
until the lever tab clicks into the
chassis slot indicating that it is
closed.
