background image

ISP2150 2U Rack Server Platform
Quick Start Guide

A Guide for Technically Qualified Assemblers of Intel

®

 Identified

Subassemblies/ Products

Before You Begin

FCC Declaration of Conformity.................................................................................................. 4
Cautions and Warnings ............................................................................................................... 6
Product Regulation Compliance..................................................................................................7
Safety Compliance...................................................................................................................... 7
Electromagnetic Compatibility (EMC) ....................................................................................... 7

ISP2150

Opening and Closing the Front Bezel ......................................................................................... 8
Locking and Unlocking the Front Bezel ..................................................................................... 9
Attaching and Removing the Front Bezel ................................................................................... 9

Installation

Open the Cover ........................................................................................................................... 9
Installing a Microprocessor....................................................................................................... 10
Installing Memory..................................................................................................................... 11
Installing a Hard Drive.............................................................................................................. 13
Installing Add-in Cards............................................................................................................. 14
Installing a Slim-Line CD-ROM Drive..................................................................................... 16
Removing a Diskette Drive....................................................................................................... 17
Re-Installing a Diskette Drive................................................................................................... 17
Close the Cover......................................................................................................................... 17
Installing the Front Bracket and Racking Your System ............................................................ 18
Installing the Front Bracket in a Cabinet................................................................................... 18
Installing the Front Bracket in a Center-Mount, Relay Rack .................................................... 20
Installing the Rail Kit and Racking Your System (Optional Accessory)................................... 21

Technical Reference

Front Panel Controls and Indicators.......................................................................................... 25
Back Panel Connectors .......................................................................................................... ... 26
Jumpers........................................................................................................................ ............. 27
Server Board Components ........................................................................................................ 29

Getting Help

....................................................................................................................................... 30

Order Number: 

 

A13687-001

Содержание ISP2150 - Server Platform - 0 MB RAM





























Отзывы: