4 3
BIOS Setup
Serial ATA
Enabled
Enable Serial ATA device. (Default value)
Disabled
Disable the Serial ATA.
Native Mode Operation
This option allows user to set the native mode for ATA function.
Note that certain OS is not supported under Native Mode.
Auto
Auto detected. (Default value)
Serial ATA
Set Native mode to Serial ATA.
Parallel ATA
Set Native mode to Parallel ATA.
Reset Configuration Data
Yes
Clear the Extended System Configuration Data (ESCD) area.
No
Disable this function. (default value)
Clk Gen Spread Spectrum
Enabled
Enable ClkGen Spread Spectrum.
Disabled
Disabled this function. (Default value)
System After AC Back
Set the mode od operation if an AC/Power loss occurs.
Power On
Power on system without pressing power button.
Stay Off
Keep the power off until the power button is pressed.
Pre- State
Set system to the last sate when AC power is removed. Do not power on
system when AC power is back. (Default value)