Intel Extensible Firmware Interface Скачать руководство пользователя страница 310

Страница: 310 / 494

Extensible Firmware Interface Specification

292

12/12/00

Version 1.02

TxOversizeFrames

Number of frames longer than the maxminum length for the
media. This would be greater than 1500 for ethernet.

TxDroppedFrames

Valid frames that were dropped because receive buffers were
full.

TxUnicastFrames

Number of valid unicast frames transmitted and not dropped.

TxBroadcastFrames

Number of valid broadcast frames transmitted and not dropped.

TxMulticastFrames

Number of valid mutlicast frames transmitted and not dropped.

TxCrcErrorFrames

Number of frames w/ CRC or alignment errors.

TxTotalBytes

Total number of bytes transmitted. Includes frames with errors
and dropped frames.

Collisions

Number of collisions detected on this subnet.

UnsupportedProtocol

Number of frames destined for unsupported protocol.

Description

This function resets or collects the statistics on a network interface. If the size of the statistics table
specified by

StatisticsSize

is not big enough for all the statistics that are collected by the

network interface, then a partial buffer of statistics is returned in

StatisticsTable

StatisticsSize

is set to the size required to collect all the available statistics, and

EFI_BUFFER_TOO_SMALL

is returned.

StatisticsSize

is big enough for all the statistics, then

StatisticsTable

will be filled,

StatisticsSize

will be set to the size of the returned

StatisticsTable

structure, and

EFI_SUCCESS

is returned. If the driver has not been initialized,

EFI_DEVICE_ERROR

will be

returned.

Reset

FALSE

, and both

StatisticsSize

and

StatisticsTable

are

NULL

, then no

operations will be performed, and

EFI_SUCCESS

will be returned.

Reset

TRUE

, then all of the supported statistics counters on this network interface will be

reset to zero.

Status Codes Returned

EFI_SUCCESS

The statistics were collected from the network interface.

EFI_NOT_STARTED

The network interface has not been started.

EFI_BUFFER_TOO_SMALL

The

Statistics

buffer was too small. The current buffer size

needed to hold the statistics is returned in

StatisticsSize

EFI_INVALID_PARAMETER

One or more of the parameters has an unsupported value.

EFI_DEVICE_ERROR

The command could not be sent to the network interface.

EFI_UNSUPPORTED

This function is not supported by the network interface.

Содержание Extensible Firmware Interface















































































































































































































































































































































































































































































































Результаты поиска

Содержание Extensible Firmware Interface

Отзывы:

Бренды по названию

Популярные бренды

Intel Extensible Firmware Interface, Спецификация

Результаты поиска

Содержание Extensible Firmware Interface

Отзывы:

Бренды по названию

Популярные бренды