Intel Express Redundant Power Supply, Руководство пользователя

Страница: 3 / 15

1
To device 1
Main Power
Backup Power
To device 2
To device 3
To device 4
Audio alarm
reset
System
Intel Express
Redundant Power Supply
RPS status
Device status
RPS status
Device status
Power
Temperature/
Fans
RPS status
Device status
RPS status
Device status
Supply 1
Supply 2
Supply 3
Supply 4
The Intel
®
Express Redundant Power Supply (RPS) provides a back-up power source to Intel network
devices such as an Intel hub or switch. This ensures that your devices will receive uninterrupted power and
zero packet loss should the device’s internal power supply fail. For a complete list of supported devices, see
the Intel Web site at http://support.intel.com/support/express/rps.
Features
For more information on the features below and installation instructions, read the rest of this guide.
DC connector cables (sold separately)
You need one of the two types of cables below to connect devices to the RPS.
Warning: Do not use any other type of DC connector cable with the Intel Express Redundant
Power Supply. The cables listed above are the only cables tested for safety under fault conditions.
Overview
Front panel LEDs
indicate the attached
device and RPS status The audio alarm
alerts you if a
problem occurs
The backup AC power
connector provides an
extra level of redundancy
should the main power fail DC power connectors
provide support for up to
four Intel networking
devices
Temperature and fan
sensors alert you if a
fan fails or if the RPS
overheats
Product code
EE200RPS1CAB:
DC connector cable for
Intel Express 220T
Stackable Hubs. This
cable has a blue sticker on
the device end. Product code
ES500RPS1CAB:
DC connector cable for all
supported Intel devices
except Express 220T
Stackable Hubs. This
cable has a gray sticker on
the device end.