Intel Express 530T, Руководство пользователя

Страница: 82 / 145

C H A P T E R 5 Intel
®
Express 530T Switch Users Guide
76
Community Strings and Trap
Receivers
Description
Use this screen to send alerts to PCs with SNMP management
applications (such as OpenView*) installed.
• Current read community: Sets a password for viewing (not
changing) the switch configuration. The string you define here
must match the read community string defined in an SNMP
application. The default read community string is “public.”
• Current write community: Sets a password for viewing and
changing the switch configuration. The string you define here
must match the write community string defined in an SNMP
application. The default write community string is “private.”
Trap Receiving Stations: When an event occurs, the switch
automatically alerts the SNMP management application by sending a
trap to the SNMP management stations (for example, PCs) defined here.
• Station IP Address: The IP addresses of PCs with SNMP
applications (such as Intel
®
Device View or LANDesk Network
Manager) installed.
• Community string: Type a string for the trap that matches the
community string defined in the SNMP management application.
If you don’t define one, the default is “public.”
• State: Enables or disables sending of traps to the specified trap
receiver.
LOCATION
Main Menu
Configure Management
Community Strings and...
NOTE
The switch supports these
traps:
• Power to the switch
was cycled or reset.
• Link, speed, or other
status changes on a
port.
• Spanning Tree topology
changes.
• A port is partitioned.
• Authentication failure.
530-Chapter5-part1.fm Page 76 Monday, September 11, 2000 4:16 PM