Installing Intelligent Device Platform Tools on the Host System
5.3.4
Download the Installer
The Wind River Host Tools are installed on the Host System using an installer.
•
If you have an Early Access Development Kit, then the Installer folder is on
the USB flash drive that was shipped with the Development Kit.
•
If you purchased the Development Kit, then see the Dear Customer Letter
included in the kit or sent to you at the time of purchase for instructions to
download the Installer.
Installing the Host Tools Base Packages
5.4
Follow the steps below to install Wind River Linux 5.0.1, Wind River Intelligent Device
Platform XT 2.0.1, and Wind River Workbench 3.3.5 on the Host System.
1.
Plug in the provided USB key into the Host System.
2.
Using the GUI or command line, copy the Installer files that you downloaded
to the
Installer
folder on the Host System. The Installer file is named
DVD-R181165.1-1-00.zip
or similar. Use command:
cp /media/AtomGatewaySW/install/DVD-R181165.1-1-00.zip \
$HOME/Installer/
3.
Using the GUI or command line, unzip the Installer zip file. Use commands:
cd $HOME/Installer
unzip DVD*.zip -d ./
4.
Go to the unzipped
DVD-R181165.1-1-00
folder and run the
setup_linux
executable. An Installer window opens. Use commands:
cd DVD-R181165.1-1-00
./setup_linux
5.
On the Installer pop-up window, select the Wind River Host Tools install
location. Use the Browse button select the
WindRiver
folder you created in
Section 4.3.1
, or enter the complete path to that folder.
6.
On Online Update Settings page, keep the default boxes checked.
7.
On this same page, if your network requires a proxy server for access to the
internet, do the following:
a)
Mark the box titled Connect to the internet using a proxy server.
b)
Provide the proxy server information for your network.
8.
On the Install Now or Create a Local Download screen, keep the default
Install box checked. Local download is for administrators planning multiple
installations of this product.
9.
On the Choose Activation Type screen, do one of the following:
•
If you received a License Activation File with the purchase of the
Development Kit:
a)
Make a directory called license in
$HOME/WindRiver
b)
Copy the license activation file into directory
$HOME/WindRiver/license
c)
Select Permanent activation and enter the full path and filename of
the license file, or use the Browse button to find it using the GUI.
Intel
®
Gateway Solutions for the IoT – Development Kit – DK50
Getting Started Guide
October 2014
28
Document Number: 330496-005
