Target Device Setup
4.6.1
Connecting to the Target Device’s Local Wireless Network
This section provides instructions to connect the Host System or another wireless
device to the Target Device’s local wireless network.
The following steps were performed on a Host System running Ubuntu 12 operating
system. The procedure should be similar for other Linux operating systems.
1.
Select the Network Icon at the top of the screen, or go to System Settings ->
Network Connections.
2.
Find the Target Device’s local wireless network with an SSID of IDPDK-xxxx.
3.
Select the Target Device’s local wireless network to connect to it.
4.
When prompted, enter the password:
windriveridp.
You should now be connected to the Target Device’s local wireless network.
Note:
The onboard wireless LAN is statically defined to use subnet 192.168.1.0
Wind River Web Interface Tool (WebIF)
4.7
Wind River provides a Web Interface tool (WebIF) that allows the user to control and
change many Target Device settings.
Note:
The following instructions assume a wireless network adapter is installed.
Use the following steps to access the Web Interface (WebIF) tool.
1.
Connect from a Host System to the Target Device on the wired or wireless
Ethernet interface as explained in
Section 3.5
Section 3.6.
2.
On the Host System, open an internet browser.
3.
In the address window of the browser, enter internet address
https://192.168.1.1
4.
If the connection to the Web Interface is successful, a popup box will ask for a
user name and password. Use
User Name:
admin
Password:
admin
See the Wind River Systems Intelligent Device Platform Programmer’s Guide at
https://www-ssl.intel.com/content/www/us/en/embedded/design-tools/evaluation-
platforms/gateway-solutions/wind-river-idp-xt2-programmers-
and Release Notes at
http://www.intel.com/content/www/us/en/embedded/design-tools/evaluation-
platforms/gateway-solutions/wind-river-idp-release-notes.html
for details regarding
the Web Interface tool and its Target Device customization options.
Intel
®
Gateway Solutions for the IoT – Development Kit – DK50
Getting Started Guide
October 2014
22
Document Number: 330496-005
