Intel Desktop Board D2700MUD, Спецификация

Страница: 31 / 96

Product Description
31
1.11.1.1 System States and Power States
Under ACPI, the operating system directs all system and device power state
transitions. The operating system puts devices in and out of low-power states based
on user preferences and knowledge of how devices are being used by applications.
Devices that are not being used can be turned off. The operating system uses
information from applications and user settings to put the system as a whole into a
low-power state.
Table 7 lists the power states supported by the board along with the associated system
power targets. See the ACPI specification for a complete description of the various
system and power states.
Table 8. Power States and Targeted System Power
Global
States Sleeping States
Processor
States Device States
Targeted System
Power (Note 1)
G0 – working
state S0 – working C0 – working D0 – working
state. Full power > 30 W
G1 – sleeping
state S3 – Suspend to
RAM. Context
saved to RAM. No power D3 – no power
except for
wake-up logic. Power < 5 W
(Note 2)
G1 – sleeping
state S4 – Suspend to
disk. Context
saved to disk. No power D3 – no power
except for
wake-up logic. Power < 5 W
(Note 2)
G2/S5 S5 – Soft off.
Context not saved.
Cold boot is
required. No power D3 – no power
except for
wake-up logic. Power < 5 W
(Note 2)
G3 –
mechanical off.
AC power is
disconnected
from the
computer. No power to the
system. No power D3 – no power for
wake-up logic,
except when
provided by
battery or
external source. No power to the system.
Service can be performed
safely.
Notes:
1. Total system power is dependent on the system configuration, including add-in boards and peripherals
powered by the system’s power supply.
2. Dependent on the standby power consumption of wake-up devices used in the system.