Intel DCCP847DYE Скачать руководство пользователя страница 2

Страница: 2 / 84

Revision History

Revision

Revision History

Date

001

First release of the Intel

Next Unit of Computing Board DCP847SKE

Technical Product Specification

January 2013

002

Specification clarification

January 2013

This product specification applies to only the standard Intel

Next Unit of Computing Board with

BIOS identifier GKPPT10H.86A.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL

PRODUCTS. NO LICENSE,

EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS

GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR

SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR

IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR

INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS

OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED

FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION

WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

All Intel

Next Unit of Computing Boards are evaluated as Information Technology Equipment (I.T.E.) for

use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar

locations. The suitability of this product for other PC or embedded non-PC applications or other

environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported

without further evaluation by Intel.

Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other

intellectual property rights that relate to the presented subject matter. The furnishing of documents and

other materials and information does not provide any license, express or implied, by estoppel or otherwise,

to any such patents, trademarks, copyrights, or other intellectual property rights.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved”

or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for

conflicts or incompatibilities arising from future changes to them.

Intel Next Unit of Computing Boards may contain design defects or errors known as errata, which may

cause the product to deviate from published specifications. Current characterized errata are available on

request.

Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your

product order.

Intel and Intel Celeron are trademarks of Intel Corporation in the U.S. and/or other countries.

* Other names and brands may be claimed as the property of others.



Содержание DCCP847DYE





















































































Результаты поиска

Содержание DCCP847DYE

Отзывы:

Похожие инструкции для DCCP847DYE

Бренды по названию

Популярные бренды

Intel DCCP847DYE, Спецификация

Результаты поиска

Содержание DCCP847DYE

Отзывы:

Похожие инструкции для DCCP847DYE

Бренды по названию

Популярные бренды