Intel CareFusion DMS-SA1300-A1E, Руководство пользователя

Страница: 27 / 32

27
Figure 2-4
3.2.2 Switch on the power
Press the power button on the right-hand side of docking station to power on the system.
3.3 Running the BIOS Setup Program
Your DMS-SA13 is likely to have been properly set up and configured by your dealer prior to
delivery. You may still find it necessary to use the BIOS (Basic Input-Output System) setup
program to change system configuration information, such as the current date and time or your
type of hard drive. The setup program is stored in read-only memory. It can be accessed either
when you turn on or reset the panel PC, by pressing the " Crtl+Alt+Del " key on your keyboard
immediately after powering on the computer. Then press “Del” to get into BIOS, and it require
a password “U$3th3forc3” before get into set up menu.
The settings you specify with the setup program are recorded in a special area of memory
called CMOS RAM. This memory is backed up by a battery so that it will not be erased when
you turn off or reset the system. Whenever you turn on the power, the system reads the
settings stored in CMOS RAM and compares them to the equipment check conducted during