manualshive.com logo in svg

Intel BLKDP55WG - P55 LG1156 MAX-16 GB DDR3 ATX Motherboard, Технические характеристики продукции

Поделиться
Скачать
Intel BLKDP55WG - P55 LG1156 MAX-16 GB DDR3 ATX Motherboard Скачать руководство пользователя страница 62

Intel Desktop Board DP55WG Technical Product Specification 

62 

 

To install an operating system that supports USB, verify that Legacy USB support in 
the BIOS Setup program is set to Enabled and follow the operating system’s 
installation instructions.   

3.6

 

BIOS Updates 

The BIOS can be updated using either of the following utilities, which are available on 
the Intel World Wide Web site: 

•

 

Intel

®

 Express BIOS Update utility, which enables automated updating while in the 

Windows environment.  Using this utility, the BIOS can be updated from a file on a 
hard disk, a USB drive (a flash drive or a USB hard drive), an optical drive, or from 
the file location on the Web. 

•

 

Intel

®

 Flash Memory Update Utility, which requires booting from DOS.  Using this 

utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash 
drive or a USB hard drive), or an optical drive. 

•

 

Intel

®

 F7 switch allows a user to select where the BIOS .bio file is located and 

perform the update from that location/device.  Similar to performing a BIOS 
Recovery without removing the BIOS configuration jumper. 

Both utilities verify that the updated BIOS matches the target system to prevent 
accidentally installing an incompatible BIOS. 

 

NOTE 

Review the instructions distributed with the upgrade utility before attempting a BIOS 
update. 

 

For information about  

Refer to 

BIOS update utilities 

http://support.intel.com/support/motherboards/desktop/sb
/CS-022312.htm

.

 

 

 

3.6.1

 

Language Support 

The BIOS Setup program and help messages are supported in US English, French, 
Spanish, and German. 

Содержание BLKDP55WG - P55 LG1156 MAX-16 GB DDR3 ATX Motherboard

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды