Intel BLKDG41MJ Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 82

Intel BLKDG41MJ Скачать руководство пользователя страница 14

Intel Desktop Board DG41MJ Technical Product Specification

14

1.2

Legacy Considerations

This board differs from other Intel

®

Desktop Board products, with specific changes

including (but not limited to) the following:

•

No serial port on the back panel

•

No diskette drive connector

•

No PS/2 mouse port on the back panel

1.3

Online Support

To find information about…

Visit this World Wide Web site:

Intel Desktop Board DG41MJ

http://www.intel.com/products/motherboard/DG41MJ/index.htm

Desktop Board Support

http://support.intel.com/support/motherboards/desktop

Available configurations for the Intel
Desktop Board DG41MJ

http://www.intel.com/products/motherboard/DG41MJ/index.htm

Supported processors

http://processormatch.intel.com

Chipset information

http://www.intel.com/products/desktop/chipsets/index.htm

BIOS and driver updates

http://downloadcenter.intel.com

Tested memory

http://support.intel.com/support/motherboards/desktop/sb/CS-
025414.htm

Integration information

http://www.intel.com/support/go/buildit

1.4

Processor

The board is designed to support the following processors:

•

Intel

®

Celeron

®

processor in an LGA775 socket

•

Intel

®

Xeon

®

processor in an LGA775 socket

•

Intel

®

Core™2 Duo processor in an LGA775 socket

•

Intel

®

Pentium

®

Dual-Core processor in an LGA775 socket

•

Intel

®

Celeron

®

Dual-Core processor in an LGA775 socket

Other processors may be supported in the future. This board is designed to support
processors with a maximum wattage of 65 W. The processors listed above are only
supported when falling within the wattage requirements of the board. See the Intel
web site listed below for the most up-to-date list of supported processors.

For information about…

Refer to:

Supported processors

http://processormatch.intel.com

CAUTION

Use only the processors listed on the web site above. Use of unsupported processors
can damage the board, the processor, and the power supply.

#

INTEGRATOR’S NOTE

Use only ATX12V-compliant power supplies.

«
...
12
13
14
15
16
...
»

Содержание BLKDG41MJ



















































































Отзывы:

Нет отзывов