manualshive.com logo in svg

Intel AXXSW1GB, Руководство пользователя

Поделиться
Скачать
Intel AXXSW1GB Скачать руководство пользователя страница 67

 

54

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 

cannot be designated. Ingress filtering cannot be enabled or disabled on an 

access port.

—

Trunk 

— Indicates the interface belongs to VLANs in which all VLANs are 

tagged, except for one VLAN that can be untagged.

•

PVID 

— Assigns a VLAN ID to untagged packets. The possible values are 1-4094 

except VLAN 4080. VLAN 4095 is defined as per standard and industry practice as 

the Discard VLAN. Packets classified to the Discard VLAN are dropped. 

•

Frame Type 

— Specifies the packet type accepted on the interface. The possible field 

values are:

—

Admit All

 — Both tagged and untagged packets are accepted on the interface.

—

Admit Tag Only 

— Only tagged packets are accepted on the interface.

•

Ingress Filtering 

— Indicates whether ingress filtering is enabled on the interface. 

The possible field values are:

—

Enable

 — Enables ingress filtering on the interface. Ingress filtering discards 

packets that are defined to VLANs of which the specific port is not a member.

—

Disable 

— Disables ingress filtering on the interface.

•

Reserved VLAN 

— Indicates the VLAN selected by the user to be the reserved 

VLAN if not in use by the system.

Содержание AXXSW1GB





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды